Page 1 of 1
std or lifted
Posted: Fri Aug 15, 2008 7:24 pm
by seaeagle
how can i tell if the 80 series has been lifted/modified?
Posted: Fri Aug 15, 2008 9:23 pm
by Mr DJ
First check the height from centre of wheel to lip of guard F&R, and post the measurements, maybe someone will be able to tell you.
Are the coil springs black or painted another colour (yellow, blue, etc.), if they are black it's a good chance they are stock.
Posted: Sat Aug 16, 2008 12:55 pm
by seaeagle
cool,
rear is 480mm
front is 510mm
springs look black
Posted: Sat Aug 16, 2008 1:13 pm
by rezpkt
hey mate, sounds like poor original springs to me.
check out this thread on offroad80s
http://www.offroad80s.com/how-high-is-y ... t1336.html
In conclusion; from center of wheel hub to bottom of your flare/guard.
Stock:
Front 520mm - Rear 525mm
2inch Lift
Front 560mm - Rear 570mm
4inch Lift
Front 645mm - Rear 670mm
6inch Lift
Front 690mm - Rear 725mm
Posted: Sat Aug 16, 2008 4:48 pm
by seaeagle
wow, i must have the only lowered 80 ...
rear has sagged heaps if the link fingures are anything to go by.
ok time to look for a lift
