Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tyres and gearing

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 79
Joined: Sat Sep 02, 2006 3:36 pm
Location: Bathurst

tyres and gearing

Post by mundy »

i have 235/75r15 on my sierra the rest of the drive line is stock standard, from the calculations i have done puttin a 1lt transfer case in it will bring gearin almost back to stock. is this right?
if not wat size tyres will bring it back to been close to stock gearing again?
just wanna make sure im not goin to over gear it for the tyres ive got

mundy
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

IF you are happy with stock gearing a 1.0 case will do it for you...
Jas.
Posts: 79
Joined: Sat Sep 02, 2006 3:36 pm
Location: Bathurst

Post by mundy »

well stock gearing would b better then how it is now, why wat else should i look at for the size tyres that are on it?

mundy
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

mundy wrote:well stock gearing would b better then how it is now, why wat else should i look at for the size tyres that are on it?

mundy
Depends on the driving you want to do I guess.
I'm a gearing junkie. I drive a bit of rock so I love my 6.5:1 lowrange gearset. www.lowrangeoffroad.com
Posts: 200
Joined: Sun Mar 19, 2006 4:29 pm
Location: Launceston

Post by CairnsZook »

4.16:1 transfer case gears.

These will bring high range back to stock, and give you a good reduction in low. I have these with 235x75R15 tyres, they are perfect.

It will be easier to find gears than it will be to find the right 1L t-case to bolt in.
Posts: 79
Joined: Sat Sep 02, 2006 3:36 pm
Location: Bathurst

Post by mundy »

how much will a set of 4.16:1 goin to set me back?

mundy
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest