Page 1 of 1
flattening rear arms on 5 link
Posted: Sun Aug 17, 2008 9:38 pm
by crankycruiser
Ive heard of ppl putting longer arms in the rears of their patrols/cruisers to get them flatter but im not keen on diong that as i cant easily get longer top arms in the rear of the 80,
I was thinkn of moving all the arms up 50mm or so on the diff end.. has anyone done this???
Posted: Sun Aug 17, 2008 9:57 pm
by MART
Your getting rear steer from your arms being on such a high angle and so short , I remember reading about it before , why not lower it 50mm and adjust the bumpstops to suit , avoid scrubbing , Cheers Paul.
Posted: Sun Aug 17, 2008 9:59 pm
by crankycruiser
MART wrote:Your getting rear steer from your arms being on such a high angle and so short , I remember reading about it before , why not lower it 50mm and adjust the bumpstops to suit , avoid scrubbing , Cheers Paul.
scrubbing isnt a problem as ive had the angle grinder to the body already........ it will be lower eventually.. but flatter arms are goin to help then too...............