Page 1 of 1
Pushlock Fittings
Posted: Mon Aug 18, 2008 3:35 pm
by FastEddie
I'm after some info on where to get 5mm pushlock fittings to replace the airlocker olive fitting at the diff. SMC tell me they dont make them and none of the hydaulics mobs around here can help. Any help to steer me in the right direction would be apreciated. (and yes I seached)
Thanks
Eddie
Posted: Mon Aug 18, 2008 3:37 pm
by Gwagensteve
Have you thought about using the ARB heavy duty airline kit? It's excellent.
Steve.
Posted: Mon Aug 18, 2008 5:03 pm
by ISUZUROVER
Festo -
www.festo.com
Sang-a
Gwagensteve - I'm sure one of the above could sell an equivalent for less $
Posted: Mon Aug 18, 2008 5:25 pm
by eliteforce32
try any modern truck spare parts joint... they have all these fittings for air systems
Posted: Mon Aug 18, 2008 7:27 pm
by brad 93hilux
hey eddie, ill have to check, but i think i have some at home....
Otherwise try complete hydraulics in port kembla.
Brad
Posted: Mon Aug 18, 2008 8:03 pm
by Tiny
x2 on the festo, I used festo on my rig, they are very simple and far stronger than arb stuff
Posted: Tue Aug 19, 2008 8:09 am
by bazzle
Ive used Festo but you can also run 6mm line and use the more common 6mm fittings.
Bazzle
Posted: Tue Aug 19, 2008 10:10 am
by nastytroll
I have changed my airline over to 6mm and used hydrolic line from the diff to chassis. I had 2 hydrolic lines made at louis hoses and seals for the same price as 1 ARB.
Posted: Tue Aug 19, 2008 11:41 am
by ISUZUROVER
bazzle wrote:Ive used Festo but you can also run 6mm line and use the more common 6mm fittings.
Bazzle
Sang-A (and I am pretty sure festo as well) make pushlock fittings in a range of sizes - 4mm/6mm/8mm etc.
Posted: Tue Aug 19, 2008 9:14 pm
by Man of Cheese
try pirtex or enzed they have a lot of stuff or could find it for you