Page 1 of 1
Looking for places in Melbourne for:
Posted: Fri Aug 22, 2008 9:59 am
by ToNkA
Custom Tailshaft
Gearbox Recondition/Changeover
Recommendations.
For a Hilux G52 Box and changing from 2 piece tail shaft to 1 piece (no centre bearing).
cheers
Posted: Fri Aug 22, 2008 10:10 am
by Gwagensteve
Ken Hastings Balancing for the tailshaft.
Steve.
Posted: Fri Aug 22, 2008 10:23 am
by hiluxmad
hardy spicer in dandy did mine bout 300 from memory
Re: Looking for places in Melbourne for:
Posted: Fri Aug 22, 2008 10:27 am
by bogged
what after 4yrs you decide to make it work now?
next olympics then?
Posted: Fri Aug 22, 2008 10:43 am
by mkpatrol
Search noob
Posted: Fri Aug 22, 2008 10:46 am
by ToNkA
mkpatrol wrote:Search noob
I invented search.
I did search but too much old crap to wade through because people chit chat in tech!
So who can I take my lovely old G52 to in Melbourne, to get it reconditioned/changeover at a good price?
Posted: Fri Aug 22, 2008 11:48 am
by hiluxmad
hall 4x4 used to do reasonable reco change over deals but havent been there in years so dont know now treading post maybe
Posted: Fri Aug 22, 2008 1:06 pm
by tna racing
hardy spicer in dandy for new or refurbished
Posted: Fri Aug 22, 2008 1:26 pm
by ToNkA
And gearbox?
Posted: Sat Aug 23, 2008 10:03 am
by chris.e
Knox driveshafts, very good work ( did an ace custom shaft for my lexus v8 cressida ) and very reasonable cost, cheaper than the others.
Posted: Sat Aug 23, 2008 10:17 am
by sierrajim
chris.e wrote:Knox driveshafts, very good work ( did an ace custom shaft for my lexus v8 cressida ) and very reasonable cost, cheaper than the others.
x 2 (if this is the guy in his backyard)
Posted: Sat Aug 23, 2008 8:07 pm
by GRPABT1
chris.e wrote:my lexus v8 cressida
Off topic but....
picsorban!
Link?
Posted: Sat Aug 23, 2008 8:25 pm
by Devious
sierrajim wrote:chris.e wrote:Knox driveshafts, very good work ( did an ace custom shaft for my lexus v8 cressida ) and very reasonable cost, cheaper than the others.
x 2 (if this is the guy in his backyard)
X3 He is ace, did a brilliant job on a 3 inch single piece shaft for my Rb26 R31.
He is the dude who works in his backyard.
Posted: Sat Aug 23, 2008 10:37 pm
by tonkatuf
Devious wrote:sierrajim wrote:chris.e wrote:Knox driveshafts, very good work ( did an ace custom shaft for my lexus v8 cressida ) and very reasonable cost, cheaper than the others.
x 2 (if this is the guy in his backyard)
X3 He is ace, did a brilliant job on a 3 inch single piece shaft for my Rb26 R31.
He is the dude who works in his backyard.
x4 did an awesome job on my RX7 a few years back, cheaper than the others to.
Posted: Sat Aug 23, 2008 11:36 pm
by Struth
sierrajim wrote:chris.e wrote:Knox driveshafts, very good work ( did an ace custom shaft for my lexus v8 cressida ) and very reasonable cost, cheaper than the others.
x 2 (if this is the guy in his backyard)
X5 good price and good work.
you'd be a fool to go elsewhere after 5 recommendations
Posted: Sun Aug 24, 2008 2:43 pm
by ToNkA
The driveshaft guy sounds great, thankyou.
Now, about that Gearbox.....
Posted: Thu Sep 18, 2008 9:50 am
by ToNkA
Struth wrote:sierrajim wrote:chris.e wrote:Knox driveshafts, very good work ( did an ace custom shaft for my lexus v8 cressida ) and very reasonable cost, cheaper than the others.
x 2 (if this is the guy in his backyard)
X5 good price and good work.
you'd be a fool to go elsewhere after 5 recommendations
x6
I went to Jeff (Knox Driveshafts) top job, and was done in two days!
Impressive!
Posted: Thu Sep 18, 2008 11:29 am
by moose
X7
he did my hilux to zook front shaft !!!!
awesome job ....quick & well priced !!!
Posted: Thu Sep 18, 2008 1:10 pm
by bazzle
Posted: Thu Sep 18, 2008 3:35 pm
by Struth
chris.e wrote:Knox driveshafts, very good work ( did an ace custom shaft for my lexus v8 cressida ) and very reasonable cost, cheaper than the others.
Yep he did my V8 and others, good bloke good pricing
Posted: Thu Sep 18, 2008 6:21 pm
by ajsr
and now you all are in agreement whats his adress and phone number
never seen so many people agree in this forum dude must be good
cheers andrew
Posted: Thu Sep 18, 2008 9:54 pm
by hokey
how much was driveshaft from bloke in knox? need one for my corolla
Posted: Fri Sep 19, 2008 10:53 am
by Struth
He lengthened a front, shortened a rear and beefed it up to suit a V8, H-duty slip yolk, new uni's, $550.00 for both.
Dropped it off on Tuesday, was ready on Wednesday
Punch his name into yellow pages
Posted: Fri Sep 19, 2008 12:12 pm
by ToNkA
Jeff Lagerwey
73 Bursaria Ave,
Ferntree Gully, VIC 3156
p: (030 97584015
Posted: Fri Sep 19, 2008 8:05 pm
by ajsr
thanks tonka
cheers andrew