Outer Limits 4x4 Board

G'day all,

Anyone out there have a idea on how to clean/rebuild a carby??

Its on a old fj 45 series. Any help would be great.

Cheers,

Tommo.

Yep but you are too far away


Get a manual, there was a thread on it here recently.

you may save a lot of hart ache just takin it to a carby joint. Real pain in the rrrrrrrse if ya put it on and it dont work properly. but if dollars are the issue pull it apart and clean with carby clean and compressed air. and reassemble making sure ya put it all back the same way. consatina a peice of cardboard and use the channels to seperate all the bits. oh ya digital cameras are a treat for alcahol memory damage, cheers