Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HAVING TROUBLE PULLING HUBS APART

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 52
Joined: Sun Jul 15, 2007 8:08 pm
Location: perth

HAVING TROUBLE PULLING HUBS APART

Post by poppeye »

decided to rebuild swivel hubs today pulled one side apart peace of piss but drivers side wont come out i cant get the drive clutch off took hub off circlip out but drive clutch wont come out due to a lip that has been created on end of inner axle just after circlip groove wondering what has caused this any help would be awesome
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

A sloppy circlip will cause burrs on the axle spline. Clean it all up with carby/brake cleaner, then use a ftp file to carefully take off the dags. You may also need to remove some daggy bits from the spline valleys too - dont force the hub coupler off the axle as the dags will score the insides.

coxy
Top
Posts: 52
Joined: Sun Jul 15, 2007 8:08 pm
Location: perth

Post by poppeye »

cheers was hoping it was that simple
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

Just take your time as ANY of the parts in that assembly are VERY exxy. Might pay to get your circlip guide checked too if its flogged out. Might be time for a new/second hand axle/CV assembly and new circlip.

Coxy
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests