Page 1 of 1
100 series cv's
Posted: Mon Aug 25, 2008 10:52 pm
by Willy Hilux
Is the 100 series ABS cv's any different in spline count or size from an 80 series??
Want to put manual locking hubs on. Any ideas people????
Posted: Tue Aug 26, 2008 8:51 am
by 75 cruser
Posted: Tue Aug 26, 2008 11:44 am
by Unidriveshafts
Spline profile is different & stub axle length is different,they definately do not interchange. Steve.
Posted: Tue Aug 26, 2008 11:48 am
by dow50r
as above, you need a 100 constant c/v to use the std drive plate or you can use a 80 series c/v and a 78/79 free wheelin hub....or a marks kit....but if you freewheel the drive, you loose ABS
Posted: Tue Aug 26, 2008 2:30 pm
by scottmcguinness172
steer clear of the avm 100 series hubs go the genuine ones i have done 3 avm hubs with no locker on 35s they break so easy
Posted: Tue Aug 26, 2008 8:58 pm
by Willy Hilux
I took off the 100 series hub today and tried to see the difference between a hilux free wheeling hubs. The spline is the same. The only thing stoping me from using them is the studs and dowls are larger on the 100 series.
Otherwise I think they would have fitted.
Already have thepart time transfere mod but want to stop the waer and tear on the front as much as posible.
Posted: Fri Aug 29, 2008 8:52 pm
by dow50r
You will be disappointed...the spline looks thesame but isnt and wont slide on. Ive tried, and thats why i answered this thread.