Outer Limits 4x4 Board

Hi all,

Just broke some parts, so now I have to buy some.

I am looking for some Feroza F300 parts.

NEW
left & right CV joints
Competition clutch

SECOND HAND
Front & rear diff


As I live in the Caribbean, the US is the easiest place to get shipping from.

So any addittional help or adivce on where to shop in the US would also be appreciated.

Not aware of a "competition clutch" for a Feroza.....

Excedy make one ( actiually a whole range - but ceramic are way too harsh... ) for the Applause which will bolt up to the Feroza, but its a slightly smaller diameter. I ran one for awhile and its worked ok but was less progresssive in take up than a stock unit.

Also used the Excedy competition pressure plate with a standard Applause driven plat and that was much better but ended up pulling the whole thing out to fit an auto.

Flywheel, comp pressure plate, comp driven plate and standard driven plate are currently all sitting in my "superceeded" Feroza pile.

If you can arrange transport you can have what you want for nix.

If all else fails I can put you onto a source for drive components in Australia - but you'l have to buy and ship those.

Still an out of action vehicle isn't much fun or use.......

Sory it took me so long to respond. lost my computer nad am now finding things i lost.

Ilooked at bring parts from AUS, but too expensive, any contacts for Feroza parts suppliers in the USA?