Outer Limits 4x4 Board

im looking to get a 2 inch body lift on a 91 soft top vit
i live in brisbane
i was wondering if anybody knew were i could get this dont or better yet could do it
other info that would be help full
price
time it would take
pros and cons

cheers luke

ps would also liek to no what my standard nugde bar and rear bar are worth as im selling them

have you done any reading/searching on body lifts in this section and the bible at all?

As to where to get it done you could do it yourself with a couple of mates over a weekend. A body lift is failry easy to do even without much mechanical skills

A body lift will take you a good mornings work, price wise I'd say $220 although you would want to allow for some longer brakelines as well.

Pros - Increased clearance for larger tyres
Increased clearance for the sills
Cheap
Cons - Increased centre of gravity, although less then a Suspension lift
Slightly more stress on body mounts
Slightly more stress on steering universals

just cruizin

are you a shop or retailer i think i might have read your name when i was searching but not sure if so could you give me a contact number or website to look at products??

cheers luke

I'll answer that one ... just cruizin' doesn't to my knowledge run a shop or anything, but from experience he makes high quality, easy to fit, reversible body lift kits that work like a dream.

I'm a mechanical noob but had my Sierra done in about 4 hours, working by myself. That includes beer breaks

vnboy_01 wrote:just cruizin

are you a shop or retailer i think i might have read your name when i was searching but not sure if so could you give me a contact number or website to look at products??

cheers luke

No shop, not retail although I do sell on ebay, I'll PM my number and here's a picture



That's a LWB kit, swb only get 2 of the smaller blocks

best kit around. i have bought a few

ok so this is a small thread hyjack do body lifts after a few years crack out the body mounts on the body???

it is possible if you don't monitor and keep up maintenance

Depends what you drive like and how much load you carry. My kits support most but not all the positions where the chassis supports the body. I use blocks the same size as the original body rubbers. I won't say it can't happen but I will say it's not likely.