Page 1 of 1
MQ SWB body on a GQ Chassie?
Posted: Wed Aug 27, 2008 5:35 pm
by RUFF
Is this a straight bolt up job? Not concerned about wiring or anything else. Just wether the body bolts straight on or if not what mods need to be done.
Posted: Wed Aug 27, 2008 6:09 pm
by Bartso
i don't think they are
i think some one already asked this somewhere in here
Posted: Wed Aug 27, 2008 6:54 pm
by mikesmith
hey ruff just done this
the last 2 bolts that u get to thru the cabin behind the seats will fit with a little bit or grinding the hole bigger on the chassis.
the middle 2 i made a mount up for because they are about 50mm away and the same with the front.
thats a swb mq cab which i cut into a ute onto a LWB gq chassis.
so no not a straight bolt on.
also need to trim around the front inner guards to clear shock towers and chassis! will need to cut the floor to if u intend to run the gq gearbox also. will need a lot cut out if no bodylift around the gearbox.
Posted: Wed Aug 27, 2008 8:57 pm
by RUFF
mikesmith wrote:hey ruff just done this
the last 2 bolts that u get to thru the cabin behind the seats will fit with a little bit or grinding the hole bigger on the chassis.
the middle 2 i made a mount up for because they are about 50mm away and the same with the front.
thats a swb mq cab which i cut into a ute onto a LWB gq chassis.
so no not a straight bolt on.
also need to trim around the front inner guards to clear shock towers and chassis! will need to cut the floor to if u intend to run the gq gearbox also. will need a lot cut out if no bodylift around the gearbox.
Thanks. It doesnt have a Nissan motor or box fitted.