Outer Limits 4x4 Board

If you have used RAW 4x4 suspension, please let me know what you think of it.

I'm looking into useing there 45mm kit on my ML Triton.

Thanks for any info,
Steve.

There on my troupy I'm happy with them

Ok i might be slightly bias here...
but...
i run their shocks on my 80 series. its lifted 4 inches. been running it abit over 1 yr. going strong. i only had stock shocks on before that but this is a huge difference.

on my comp truck i also run some of their shocks and in the limited use it has had there has been no dramas.

the mog rover also ran their shocks in the past i believe.

they do alot of truck shocks too so they are well equiped and very knowledgable on big shocks.
and when you see their testing area out the back, they have tested some of their 4x4 shocks on the machine, had them so hot the paint was dripping off and the shock was still performing.

so 2 thumbs up from me.

We offer these now as we are an agent for Fulcrum suspension, I fitted a test pair to my GU and am very happy with the ride, they are made in Canada by Gabreil as are the Tough Dog shocks so I am confident it is a quality product as the Tough Dog has shown to be, the valving is well suited and the testing process that Fulcrum put all the components they sell through is surprisingly thorough.

Cheers

Joel