Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Transfer case handbrake

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 512
Joined: Fri Sep 16, 2005 12:36 pm
Location: Central Coast, NSW

Transfer case handbrake

Post by justinshere »

Can someone tell me if you can run the transfer hand brake on a lux without a body lift?
...and without cutting out the tunnel

Cheers
----------------------------------------------------
Xcab Lux on 37 Treps
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

I think it should be fine. Check with Mick at Superior Eng. to be sure. Ph.38896778
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Subversive Bucolicism
Posts: 9196
Joined: Sat Mar 13, 2004 10:47 pm
Location: I think I hear a Dingo eating your Baby

Post by longlux »

Workplace Safety :
Destroying our forests one Take 5 at a time.

Every time you do a Take 5 an Orangutan cries.

https://www.facebook.com/shadowthetravelcat" onclick="window.open(this.href);return false;
Posts: 66
Joined: Sat Nov 20, 2004 12:27 am
Location: Perth

Post by Chrismb »

if you are running duals you will have to clearance the floor a bit, i used a BFH to bash a section on the drivers side in about 2 - 3 mm, but without duals you will be fine.
www.locktup4x4.com.au
Posts: 512
Joined: Fri Sep 16, 2005 12:36 pm
Location: Central Coast, NSW

Post by justinshere »

Thanks, ill just do it and see what happens.
----------------------------------------------------
Xcab Lux on 37 Treps
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest