Page 1 of 1
what does your sierra soft top compliance plate state it is?
Posted: Thu Aug 28, 2008 7:38 am
by islandvitara
did a bodyswap on my sierra from hardtop to softop the compliance plate states it is a van. Just want to know what other softop sierras have on there compliance plate as to what type of body it is? Having trouble with a rwc.
Posted: Thu Aug 28, 2008 7:49 am
by lay80n
Pretty sure my soft top (90 model) states it is a ute, but i would have to check.
Layto....
Posted: Thu Aug 28, 2008 8:12 am
by GRPABT1
My mod plate says ute
Posted: Thu Aug 28, 2008 8:43 am
by moose
I think mine says "multi" ??
Posted: Thu Aug 28, 2008 9:18 am
by alien
i cant remember rego, but the first insurance place i was with levied me with: 4wd, soft-top, utility, sports car (2 seats).
Pretty sure rego is "utility"
Posted: Thu Aug 28, 2008 9:39 am
by Gwagensteve
I have seen a 2 seater SWB factory ute that has a (legit) compliance plate the speifies the car as a 4 seater super carry.
sometimes Suzuki used whatever they had.
Steve.
Posted: Thu Aug 28, 2008 9:48 am
by Spike_Sierra
my LWB with canopy says station wagon, my drover hardtop says van.
you could just say it came out with a canopy, hence the van name
Posted: Thu Aug 28, 2008 9:59 am
by want33s
Mine says "D UTE"
Just go to the wreckers and get a soft-top compliance pate off an 89-94 model.
Jas.
Posted: Thu Aug 28, 2008 3:51 pm
by islandvitara
Spike_Sierra wrote:my LWB with canopy says station wagon, my drover hardtop says van.
you could just say it came out with a canopy, hence the van name
yeah thats what mine says too!!!
van - but i have no canopy....
i think i'll have to get a canopy or softop to satisfy em
ALSO - DOES ANYONE HAVE A STANDARD BUMPER AND CANOPY/SOFTOP I COULD BUY OR BORROW FOR A RWC??? PM ME OR CALL 0431917144 AS I WOULD LIKE TO ORGANISE ASAP AS ITS NEEDED FOR A RWC.
CHEERS, Islandvit
Posted: Thu Aug 28, 2008 6:44 pm
by mick85
mine says ute but under insurance is convertible..
Posted: Thu Aug 28, 2008 8:21 pm
by ajsr
VAN 85 Drover hi top
Posted: Thu Aug 28, 2008 8:24 pm
by St Jimmy
Rego say 4 seat ragtop ute
PLATE says 4 seat ute
Posted: Thu Aug 28, 2008 9:46 pm
by spamwell
my 81 model was a soft top and it said panel van, it really shouldn't matter lol
Posted: Fri Aug 29, 2008 7:24 pm
by rustyzook
my 83 cab was a PVF = panel van with fittings as a 2 seater nartuly i put a LWB ute cab and went to RTA and said its a ute and allways has been
no worries!
Posted: Fri Aug 29, 2008 7:51 pm
by islandvitara
ae thanks everyone for your replies, seems its a mix between panel vans and utes! im geting my sierra mod plated on monday for rwc purposes - 2 seat capacity. but i told the bloke that id done a body swap and he said i wont need a mod plate for it? is that right? so at the moment its just a mod plate for the seating capacity 4 to 2
Posted: Fri Aug 29, 2008 7:58 pm
by jonno_racing
looked at mine today.. 98 coily.. sez its a VAN!! hmmm