Page 1 of 1
32"MTRs
Posted: Tue Mar 09, 2004 6:20 am
by jacka
I have a widetrack Sierra with a 2" body lift and suspension lift. Fitted 3,2" rubber, however am getting some serious rubbing around the rear bar, exhaust and fuel filler pipe. Also at the front, rubber is hitting the springs. Have 2.5 backspaced wheels, any suggestions on how to improve clearance?
Posted: Tue Mar 09, 2004 8:09 am
by moose
Posted: Tue Mar 09, 2004 8:09 am
by stumped
buy a grinder
Posted: Tue Mar 09, 2004 1:22 pm
by DeWsE
stumped wrote:buy a grinder
Yeah grind through the fuel filler pipe
I'm full of crap, don't listen to me if you value your life
Posted: Tue Mar 09, 2004 1:38 pm
by stumped
DeWsE wrote:stumped wrote:buy a grinder
Yeah grind through the fuel filler pipe
I'm full of crap, don't listen to me if you value your life
Posted: Tue Mar 09, 2004 2:22 pm
by N*A*M
in the rear, i trimmed the bar corners and quarter panels where the mud flap mounts. i also zip tied the fuel hose towards the chassis away from the tyres. i used extended steering and bump stops up the front.
Posted: Tue Mar 09, 2004 2:34 pm
by markil
stumped wrote:
buy a grinder
Yeah grind through the fuel filler pipe
And grind through the front springs too!
Posted: Tue Mar 09, 2004 6:26 pm
by Beastmavster
DeWsE wrote:stumped wrote:buy a grinder
Yeah grind through the fuel filler pipe
Lol like my mate colin decided he just HAD to do
I'm full of crap, don't listen to me if you value your life
