Page 1 of 1
rear spring mounts
Posted: Sat Aug 30, 2008 10:57 am
by Walrus4x4
Has anyone moved the rear spring shackle mounts from though the chassis to underneath the chassis.
And is this a good or bad idea ??
Posted: Sat Aug 30, 2008 11:19 am
by zer0
its a good idea i did it but have a look at my old build...
the only prob u will have is that u end up spacing rear down 75mm so you will intern have to space your front down the same amount..
Heath
--Zer0--
Posted: Sat Aug 30, 2008 11:25 am
by Walrus4x4
i was thinking of doing shackle reversal and spacing it down to the same height.
Posted: Sat Aug 30, 2008 12:01 pm
by zer0
shackle reversal on the front? or a the leaf spin around for the rear?
yeah if you do the shackle reversal on the front you should think about gettin high steer arms as well as a gq/gu steering box the problem i had was that keeping it still spua your linkage between knuckles will end up binding on the leaves so was looking at gettin 2 high steer arms for both sides and having to attach them
heath