Page 1 of 1

GQ Front LSD

Posted: Tue Sep 02, 2008 7:47 pm
by MyGQ
Hay guys

did a bit of a search but didn't quite get what i wanted

Mate is planing on putting in a LSD into the front of his GQ (yeah i know the locker route but LSD in front doesn't affect you entering Willowglen in the standard class)

Now i know a Pathfinder or Navara LSD fits but i don't know what year model or make you need. can someone help out here?

Posted: Tue Sep 02, 2008 8:45 pm
by PGS 4WD
I can tell you we tried it and it broke, the LSD is very small and the plates broke into lots of little bits, this was with 36" simexes and a TB42 carby Patrol.

Joel

Posted: Tue Sep 02, 2008 9:15 pm
by ST391GQ
PGS 4WD wrote:I can tell you we tried it and it broke, the LSD is very small and the plates broke into lots of little bits, this was with 36" simexes and a TB42 carby Patrol.

Joel
In that case...it should work quite well wth standard tyres and normal lifts etc????

I too am interested in this as well....just for that bit extra when things get narly when I am towing camper sumwhere to escape the hooligan element :cool: :) :)


Cheers Keith

Posted: Tue Sep 02, 2008 11:05 pm
by MyGQ
yeah its not for a super modified patrol, its for a simple 2" setup with 33's, its going to be a traction for just a bit extra off road performance, not a comp truck.

Just need to know what we are looking for

Posted: Wed Sep 03, 2008 2:36 am
by dave_str
R50 pathfinders run the H233B rear diff and so do the WD21 Pathfinder. Both run LSD's.

D21's and certain D22's run the H233B rear diff aswell. All bar the ZD30DDT and YD25DDTI CRD powered Navara's run the H233B rear diff. Which is the diff you will need the LSD out of.

ZD30DDT and YD25DDTI CRD powered Navara's run the C200 which wont help you at all.

Dave.

Posted: Wed Sep 03, 2008 2:55 am
by (EST)MahviaDeTyrk
MK rear diff

Posted: Wed Sep 03, 2008 1:54 pm
by patrol man
The diff you what will have the 31 spline axles, all later model Navaras and Pathfinders (about 95 on ) run the 33 splines, be carful with MQ/MK stuff as the crown wheel mounting bolt holes change, cheers Phill.