Page 1 of 1
impco 200 / 225 mixer
Posted: Wed Sep 03, 2008 8:53 pm
by narns1mav
what does the bal port get connected to
Posted: Wed Sep 03, 2008 9:19 pm
by Patchy
usually the air box before your filter, or the air intake snorkel.
Posted: Wed Sep 03, 2008 9:56 pm
by narns1mav
is it needed or can it be blocked off
Posted: Wed Sep 03, 2008 10:35 pm
by ajsr
pretty sure it needs to breath
pm slyvan1 he fits gas
Posted: Wed Sep 03, 2008 10:53 pm
by bad_religion_au
which is it? 200 or 225?
i've only got experience with a 200, but mine wouldn't run with the balance line connected. disconnected, all good.
pretty sure it's only really needed if there is a larger than normal pressure difference between the mixer and "normal" (i.e. in a turbo application, or due to a cold air intake/air ram.
Posted: Wed Sep 03, 2008 11:15 pm
by narns1mav
ive got 1 of each and they both have the bal port on them
Posted: Thu Sep 04, 2008 9:18 am
by Zeyphly
are you running a snorkle? If not just leave them open to atmosphere
Posted: Thu Sep 04, 2008 8:05 pm
by PGS 4WD
The fitment of a balance line is required with a snorkel, it's fitment will also tend to lean the mixture right out so re-tuning is required.
Cheers
Joel
Posted: Thu Sep 04, 2008 8:19 pm
by narns1mav
so where on the snorkle would i connect it to i thought it was the converter that had to be connected to snorkle not the mixer