Page 1 of 1
lj80 front axle
Posted: Wed Sep 03, 2008 9:38 pm
by T-rex
just wanted to know if anyone out there had any they wanted to part with,
posted in the wanted section but not sure if everyone looks there.welded up the front and it twisted off just behind the cv first outing. it necks down to about 20mm, can anyone tell me what the spline count is that go's into the seirra cv's
cheers Troy
Posted: Thu Sep 04, 2008 5:05 pm
by T-rex
just a few photos for those who dont know what an LJ80 is.
And on the axle question, does anyone know what the slpine count is on a Sierra? The end that goes into the CV. The spline count on the LJ that goes into the CV is 19.
Posted: Thu Sep 04, 2008 7:57 pm
by 3 cyl
They are the same spline as a Sierra.
Posted: Fri Sep 05, 2008 2:33 pm
by Mudbits
We should have a few here but they are not labeled. Could you please tell me the length so i can look next week?
Posted: Fri Sep 05, 2008 4:10 pm
by 3 cyl
Looks like you already have 1 liter Sierra CV's as you have freewheeling hubs.
Posted: Fri Sep 05, 2008 6:32 pm
by T-rex
yeah its had the whole knuckle replaced got the disk brakes to.
the axle lenghth is about 500mm long, and about 665mm with the cv fitted.
[/quote]
i would of thought the sierras had a larger spline into the cv, atleast the 1.3s. why would you change your side gears and go up to 26mm spline only to have it neck down to 19 spline(20mm) at the cv. or are the cro-mo
ones bigger
Posted: Thu Sep 11, 2008 7:29 am
by Mudbits
Hi,
I have one here 501mm long with 19 spline one end and 22 spline the other.
Is this what you need?
Posted: Thu Sep 11, 2008 7:49 pm
by T-rex
yes mate thats the one. how much you want for it? and would you be able to send it to OZ
thanks Troy
Posted: Fri Sep 12, 2008 8:30 am
by Mudbits
You have mail.