What is the best solution to fix my head light problem{ high beam won't go off and have been told switch is stuffed} other than forking out $350 for a new one. Can i mount switches on dash and just use exiting assembly for indicators and wipers?
Boxhead.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MK Indicator switch assembly stuffed.
Moderator: -Scott-
They're easy to fix. Pull it apart and you'll probably find one of the little plastic bits overheated and deformed - just heat it up a bit and push it back into shape. I've fixed mine this way a few times over the last few years.
Failing that, go to a wreckers and grab one off a bluebird or similar, same part number.
Failing that, go to a wreckers and grab one off a bluebird or similar, same part number.
MK Indicator switch assembly stuffed.
Thanks mate will do that, so i take it you mean a Bluebird from the same era series 1, 2 and 3 ?
Boxhead.
Boxhead.
Who is online
Users browsing this forum: No registered users and 0 guests