Page 1 of 1
MK Indicator switch assembly stuffed.
Posted: Fri Sep 05, 2008 2:59 pm
by Boxhead
What is the best solution to fix my head light problem{ high beam won't go off and have been told switch is stuffed} other than forking out $350 for a new one. Can i mount switches on dash and just use exiting assembly for indicators and wipers?
Boxhead.
Posted: Fri Sep 05, 2008 3:55 pm
by festy
They're easy to fix. Pull it apart and you'll probably find one of the little plastic bits overheated and deformed - just heat it up a bit and push it back into shape. I've fixed mine this way a few times over the last few years.
Failing that, go to a wreckers and grab one off a bluebird or similar, same part number.
MK Indicator switch assembly stuffed.
Posted: Fri Sep 05, 2008 10:32 pm
by Boxhead
Thanks mate will do that, so i take it you mean a Bluebird from the same era series 1, 2 and 3 ?
Boxhead.