Outer Limits 4x4 Board

Original Post Edited.

What GU Airbox do you need to fit into a GQ TD4.2L Turbo ?

Want to get a quote off nissan for a new one but want to make sure I'm getting the right one.

Any Help would be appreciated.

Nick

Need to change the air box I have on my patrol.
Trying to work out where I can get one like this in the photo.
Its a GQ td4.2 with after market turbo. Looking at putting it on the guard.
Also can anyone confirm what GU ones fit ?
I have seen it before in a search but cant seem to find it again.
Any help would be appreciated.

Or can someone tell me what Air cleaner is shown in this photo ?

Thanks Nick

[/list]

top pic is an old AIT turbo kit air cleaner, they use a commodore type panel filter.

Bottom pic is a modified GQ pre cleaner.

GU aircleaners do fit into GQ with little modification.

2nd pic looks like 60 series Cruiser...
Maybe?

Jas.

The square one looks alot like a falcon / comodore style. A trip to the wreackers would give you a better idea of which one would suit and you could take some measurements while your there.

nastytroll wrote: GU aircleaners do fit into GQ with little modification.

Can you give me some more info on this ?

Is it 4.2L or 3L ? And how many modifications ?

I still can seem to find any thing on search.

Thanks for the info.

Nick

its a 4.2 pre cleaner, i just sold one for $50 bucks

theres heaps that pop up on ebay

Just remembered that BIG GQ fixed up my profile on Patrol4x4 so I jumped on there and had a search.

http://www.patrol4x4.com/forum/showthre ... ir+cleaner

The one you need is a GU ZD30 3L air box.

Thanks for the info.

Nick

Have a look in the members section.

gujohnno just fitted a GU air box to his GQ, there are pics in his thread.

I dont know what turbo glide do to modify the GQ pre cleaner, just read it on their website.

The top pic is a cast aluminium airbox made by AIT it does take a panel filter, I think its a commodore V6 filter. I have 2 of these filters here.

GU 4.2l and 3l are both the same, aside from the MAF braket on the output side of the ZD30 cleaner but this can be cut off to be the same as the TD42 cleaner.

I used a Gu 4.2 TDi airbox.
Fitted easily enough.
Used 3mm foad to take up the difference between the OD of the flange comming off the guard and the ID of the airbox.




2 of the airbox bolts lined up perfectly and is enough to hold it in place.