Page 1 of 1
leaf to coil conversion
Posted: Tue Sep 09, 2008 7:37 pm
by MITZI PIG
after looking at some of the post. have got inspierd to convert my l200 rear from leaf to coil rear. has enybody done it to a triton or pajero before. need to get some advice before starting. any advice would be greatfull
Posted: Tue Sep 09, 2008 7:55 pm
by NJV6
Maybe best to explain what you want 1st.
To improve ride and not worry about carring big loads, take out a load leaf. This will help it flex.
To make it flex well and get a nice ride keep the leaves but put some nice loooong ones in there.
It takes a bit of work to get a rear setup to work well. Radius arms can work well but flex is limiting.
Posted: Wed Sep 10, 2008 5:33 pm
by MITZI PIG
after more flex so wat sort of longer springs should i use.