Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
sd33 5 speed to fit in a l28 4 speed
sd33 5 speed to fit in a l28 4 speed
hi guys just got a question for you all that i need some help with i have an mq shorty with an l28 4 speed and a mate has offered me a five speed out of an mq shorty with an sd33 diesel just wondering if the box will bolt up to the motor been given silly information like just have to change the bellhousings over stuff like that any help would be great
yea nah, the bell-housings on both motors are vastly different to each other
if you have every thing from the diesel trol then drop it into your shorty, i just finished swapping a "popped" turbo SD33 out for a NA one for a friend of mine and I'm very suprised how much more torque it has over my 3.2 navie
if you have every thing from the diesel trol then drop it into your shorty, i just finished swapping a "popped" turbo SD33 out for a NA one for a friend of mine and I'm very suprised how much more torque it has over my 3.2 navie
rear quarters are evil and must be punished with rocks
Re: sd33 5 speed to fit in a l28 4 speed
diesel 5 speed won't fit L28, it has 30mm shorter clutch shaft.mattstar wrote:hi guys just got a question for you all that i need some help with i have an mq shorty with an l28 4 speed and a mate has offered me a five speed out of an mq shorty with an sd33 diesel just wondering if the box will bolt up to the motor been given silly information like just have to change the bellhousings over stuff like that any help would be great
Diesel 5 will fit,, look in bible. take input shaft and bellhousing from 4 spd swap to five spd. all done bolt back in. Now make up new drive shafts. OR just use bellhousing and cut 30mm off the 5spd input shaft.
You may have a prob with the gear stick. 5spd the stick if further forward in box. Either cut floor up under heater box and make new floor plate or the top off the 4sp will fit the 5spd with a few selector mods..
Been there done this, all is great until you come to the conclusion that it stilll used as much fuel.. well a little less,, and it wont use as much oil 1st is lower. 4.6 diffs in 5th about 2400rpm on 33"s
Sterlo
You may have a prob with the gear stick. 5spd the stick if further forward in box. Either cut floor up under heater box and make new floor plate or the top off the 4sp will fit the 5spd with a few selector mods..
Been there done this, all is great until you come to the conclusion that it stilll used as much fuel.. well a little less,, and it wont use as much oil 1st is lower. 4.6 diffs in 5th about 2400rpm on 33"s
Sterlo
heheWho is online
Users browsing this forum: No registered users and 3 guests