Page 1 of 1
snorkel fiting to an v8 gas
Posted: Sun Sep 14, 2008 9:37 am
by cashy
hi all i have a v8 lux on straight gas was just wondering if any one have had a snorkel fited to one
how is it done
cheers cashy
Posted: Sun Sep 14, 2008 1:07 pm
by macca81
you put a hole in your front guard on the intake side, then run a pipe thru said hole and attach to intake, place other end of pipe at roof leval
snorkel
Posted: Sun Sep 14, 2008 8:11 pm
by cashy
its not that simple buddy
i have a gas snorkel on it with an air filter
i have the snorkel itself sorted just conecting it
Posted: Sun Sep 14, 2008 10:41 pm
by Zeyphly
What gas system are you running?
Posted: Mon Sep 15, 2008 6:54 pm
by V8 Hilux
My hilux had the gas mixer sitting on the carby. Not the Snorkle type which i think you have. I just made a carby box out sheet metal and attached the snorkel to that. Supercharged cars that run a blow through system with a carby, usally have them. I copied a mates design and i can easily service the air cleaner or get at the carby by undoing 4 wing nuts!
Posted: Mon Sep 15, 2008 8:30 pm
by PGS 4WD
Don't forget a balance line and a retune.
Joel