Outer Limits 4x4 Board

just got the head machined and fitted a new piston , do i just turn engine till No 1 is at the top then turn the head / camshaft till the valves are closed at no 1 also . its not together yet thought it mite be easyier if its not fitted. any advise would apreciated. cheers ron

Guess your talking about timing , there are links to online manuals here , they will have the timing setup , also keyway in crankshaft always faces up and the cam timing mark is on the metal cover behind the cam pulley , Cheers Paul.

thanks heaps thats what i,m after. cheers ron