Page 1 of 1
lt230 t/case
Posted: Mon Sep 15, 2008 1:15 pm
by q_ship
gday guys was just wondering if anyone knows the distance between the 2 front flanges on the lt230 t.case?
centre to centre measurements would be great
thanks in advance guys
Posted: Mon Sep 15, 2008 3:57 pm
by KiwiBacon
Is it the offset between input and output you want?
It's 230mm.
Posted: Mon Sep 15, 2008 4:22 pm
by q_ship
thanks mate
no the distance between the 2 front flanges
essentially wanna know if its wider than my mq transfer
cheers
Posted: Mon Sep 15, 2008 5:13 pm
by KiwiBacon
q_ship wrote:thanks mate
no the distance between the 2 front flanges
essentially wanna know if its wider than my mq transfer
cheers
I'd like to help, but I've got no idea what you're asking.
Distance from mounting face to front drive flange?
Posted: Mon Sep 15, 2008 5:39 pm
by ISUZUROVER
q_ship wrote:thanks mate
no the distance between the 2 front flanges
essentially wanna know if its wider than my mq transfer
cheers
I have no idea either??? As Dougal said, the distance between the centreline of the input and the centreline of the outputs is 230mm.
If that isn't what you want, maybe post up a pic/diagram, so we know - then one of use will be more than happy to measure it for you.
Posted: Mon Sep 15, 2008 7:31 pm
by GRIMACE
wow! maybe he wants the length of the unit from front flange to rear flange?
Posted: Tue Sep 16, 2008 8:46 am
by q_ship
this is very rough guys. i need the distance between the 2 front flanges. distance between the input shaft flange and the front tailshaft flange?
thanks for your help
[/img]
Posted: Tue Sep 16, 2008 9:38 am
by HSV Rangie
230mm
michael.
Posted: Tue Sep 16, 2008 11:25 am
by q_ship
thanks guys
Posted: Tue Sep 16, 2008 5:05 pm
by KiwiBacon
q_ship wrote:thanks guys
The front and rear output shafts are also directly inline.