Page 1 of 1
Sydney Engineers Certs
Posted: Wed Sep 17, 2008 12:47 pm
by TheOtherLeft
Does anyone know of any engineers in the Sydney region that can look at pop-top conversions of 4WDs?
I'm getting the list from the RTA but as I understand it most engineers specialise in certain areas only.
Posted: Wed Sep 17, 2008 6:52 pm
by TheOtherLeft
Has anyone dealt with Richard Grdusiak in Penrith or Peter Gillard in Leichhardt/Canterbury?
Posted: Wed Sep 17, 2008 7:53 pm
by Bezman
VSI 15 on the RTA website (is for unrestricted signatories) has been pulled by the RTA at the moment as they they are removing some engineering signatories for various reasons, there is still a list of restricted signatories available on the RTA site. Both engineers mentioned are on the unrestricted list, with the second one mentioned, work category as passenger car and light commercial vehicles up to 4.5 tonnes. Both should be able to engineer what your asking.
Posted: Wed Sep 17, 2008 9:24 pm
by stool
www.consulmotive.com.au
John varetimidis in Mortdale is the man to see.
Posted: Thu Sep 18, 2008 3:40 pm
by BlueSuzy
Richard Grdusiak in Penrith
Goooooonnnnnnnne, Dont know where. He did alot of cars. Including a stock civic....
Posted: Thu Sep 18, 2008 4:28 pm
by TheOtherLeft
BlueSuzy wrote:Richard Grdusiak in Penrith
Goooooonnnnnnnne, Dont know where. He did alot of cars. Including a stock civic....
I just got back from Richard Grdusiak's. He's pretty friendly but charged a lot more then expected. Plus it takes a couple of days to get the new compliance sticker thing
I think he's moved since quite a few people can't seem to find him. He's between the Caltex Servo and John Cootes Carpets, on the cnr of Castlereagh St and Coreen Ave, Penrith