Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tjm locker any good

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

tjm locker any good

Post by matto »

I will be getting a locker for my gu rear diff soon, are the tjm lockers good?
I ask because my local tjm dealer told me they had recalled some lockers due to faults in design but on the other hand i was talking to a bloke that works on diffs and gearboxs and he said hes fitted heaps of arb and a few tjm lockers and he reckons that the tjm are heaps stronger in design. Are there or was there any problems?
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

That surprises me that there are problems. The company building them has been doing so for a very long time. I also tend to think that many consider them to be as good as lockers get.

I have ARBs though JacMac's (TJM) would be my first choice - I didn't get them purely due to manufacture time and a broken car.
Last edited by Slunnie on Sat Sep 20, 2008 12:28 pm, edited 1 time in total.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

do a search, you will find a zillion oppinions re whats better. seems pretty even votes from what ive seen.

but yes i had heard they had temporarily stopped selling them.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

Im getting an arb locker in the front from a mate but i would like to try a tjm in the back, are tjm installers any good?
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 55
Joined: Thu Sep 25, 2008 12:06 pm
Location: aus

Post by muzza85 »

there was no recall they are currently in the process of revamping them you should definatley get a tjm one and yes tjm installers are good infact there probably the best out there
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

there is little difference between installing either locker, I have done both.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Slunnie wrote:That surprises me that there are problems. The company building them has been doing so for a very long time. I also tend to think that many consider them to be as good as lockers get.

I have ARBs though JacMac's (TJM) would be my first choice - I didn't get them purely due to manufacture time and a broken car.
As far as im aware Jeff is no longer making the lockers for TJM. At least not all of them.
Top
Posts: 41
Joined: Tue May 20, 2008 7:43 pm
Location: Armadale WA

Post by D2MUCH »

Just out of interest what do these TJM Lockers go for ?
Top
Posts: 55
Joined: Thu Sep 25, 2008 12:06 pm
Location: aus

Post by muzza85 »

D2MUCH wrote:Just out of interest what do these TJM Lockers go for ?

your looking at about 1200
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

muzza85 wrote:
D2MUCH wrote:Just out of interest what do these TJM Lockers go for ?

your looking at about 1200
just supplied yeah?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 55
Joined: Thu Sep 25, 2008 12:06 pm
Location: aus

Post by muzza85 »

thehanko wrote:
muzza85 wrote:
D2MUCH wrote:Just out of interest what do these TJM Lockers go for ?

your looking at about 1200
just supplied yeah?

yeah its $400 to fit
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

is the arb compressor is fine to use?
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 55
Joined: Thu Sep 25, 2008 12:06 pm
Location: aus

Post by muzza85 »

yea the arb compressor is ok to use
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest