Page 1 of 1
HELP indicators don't work unless i use hazards
Posted: Sun Sep 21, 2008 9:16 pm
by mk swb learner
g'day
i have a 86 mk patrol the indicators don't work when i use the levr but they flash when i use the hazars it's not a use wat else could it be???
cheers mike
Posted: Sun Sep 21, 2008 9:24 pm
by hjgq
fuse
Posted: Sun Sep 21, 2008 9:31 pm
by mk swb learner
nope not a fuse checked al of the ones under the drivers dash all good wat else could it be??
thanks for the reply
Posted: Sun Sep 21, 2008 10:29 pm
by toaddog
Control relay - the flasher thingy for the non technically minded
Posted: Mon Sep 22, 2008 3:16 am
by dave_str
I say contacts in the light/indicator switch. There not hand to pull apart and clean and put back together.
Dave.
Posted: Mon Sep 22, 2008 1:54 pm
by mk swb learner
thanks for the replys i swaped the cans around the indicators still didn't work and when i pulled on the hazards they worked but didn't flash..i think it might be the lever itself because the headlights don't work every now and then also the rear indicators have stopped working even when the hazards are on??
why would the rear ones just stop working the wires are all connected as fae as i'm aware ?
this is getting really annoying as i have to get them working b4 saturday for an inspection ..
if anyone knows much about this or knows someone who does and they live around newcastle let me know please as auto electricans are expensive.
cheers
Edit/Delete Message