Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Building Rock sliders

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 14
Joined: Tue May 13, 2008 9:08 pm
Location: Maryborough QLD

Building Rock sliders

Post by skippa83 »

hey guys,
just wanted to know where the best place to bolt rock sliders to on a 1995 sierra is? and also where can i find some plans or ideas on how to build some?
any help would be greatly appreciated
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Bolt on to the chassis I reckon...

I would look through a bunch of american online zook stores, to get an idea of how you want to build them.
There is a slider thread on here somewhere too.
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

http://www.outerlimits4x4.com/phpBB2/ftopic118038.php

Get some ideas.
I am Tim
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Image
Image
32NB gal pipe.
Bolted to front and rear body mounts outriggers and clamped to chassis rail in middle.
Jas.
Top
Posts: 51
Joined: Sun Jan 20, 2008 7:30 am
Location: bellingen(coffsharbour)

Post by sally_o »

found this stuff in an mag called silo section steel . . going to try get hold of some to do my vit with in a few weeks.. looks the goods.. not sure of the dimensions yet but i do know its 2.3mm thick, i have a pic but i cant figger out how to send it.[/img]
Top
Posts: 51
Joined: Sun Jan 20, 2008 7:30 am
Location: bellingen(coffsharbour)

Post by sally_o »

found this http://www.onesteel.com/images/db_image ... pr03ap.pdf[/url]
Top
Posts: 242
Joined: Thu Jun 15, 2006 10:24 pm
Location: sydney

Contact:
Contact hyzook

Post by hyzook »

Mine bolt to the side of the chassis extension but during an upcoming rebuilt I want to make some like these from the other thread. Just got to work out a mount solution and how to get around the lip and drain holes.

Image
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests