Page 1 of 1
gq diff
Posted: Mon Sep 22, 2008 10:15 pm
by tassie wombat
hope this isnt a silly question,but i was wondering is a rear diff centre out of an 88 gq will fit in the front of the same vehicle(lwb wagon)?thanks
Posted: Mon Sep 22, 2008 11:06 pm
by ST391GQ
In a word...NOPE !!
Spline count between F and R is different.
Cheers Keith
Posted: Tue Sep 23, 2008 5:34 pm
by tassie wombat
bugger! had a rear lsd diff centre given to me,thought it would have been good to have a lsd front and rear.
Posted: Tue Sep 23, 2008 5:39 pm
by Patroler
do a search on navara rear lsd's, i reckon a few people have put them in gq fronts, although it probably won't be free...
Posted: Tue Sep 23, 2008 6:59 pm
by _noddy
sorry but could a mq front diffs fit in a gq front
Posted: Wed Sep 24, 2008 2:05 am
by dave_str
No different diffs. MQ's run the C200 front diff.
GQ's run the H233B front diff.
Dave.
Posted: Wed Sep 24, 2008 8:11 am
by WICKED
MQ fits GQ front with a few mods
Posted: Wed Sep 24, 2008 9:30 am
by ozy1
WICKED wrote:MQ fits GQ front with a few mods
MQ REAR fits GQ front with mods
Posted: Wed Sep 24, 2008 11:14 am
by WICKED
ozy1 wrote:WICKED wrote:MQ fits GQ front with a few mods
MQ REAR fits GQ front with mods
Missed a word
Posted: Wed Sep 24, 2008 4:06 pm
by Patroler
ozy1 wrote:WICKED wrote:MQ fits GQ front with a few mods
MQ REAR fits GQ front with mods
Anyone care to enlighten me what mods exactly required to fit Mq rear into GQ front, just that ive got an mq rear with a locker... and a gq with no lockers...
Only thing is that the gq is 4.1:1 and the mq is 4.625:1, can i just pull out the locker and fit it in?
sorry for the hijack!
Posted: Wed Sep 24, 2008 4:15 pm
by WICKED
Patroler wrote:ozy1 wrote:WICKED wrote:MQ fits GQ front with a few mods
MQ REAR fits GQ front with mods
Anyone care to enlighten me what mods exactly required to fit Mq rear into GQ front, just that ive got an mq rear with a locker... and a gq with no lockers...
Only thing is that the gq is 4.1:1 and the mq is 4.625:1, can i just pull out the locker and fit it in?
sorry for the hijack!
MQ Rear locker's don't fit the GQ C/W&P as far as I know.
MQ Centre's fit GQ housing's if you have steering on the front.
just need to redrill the bolt holes on the Pumkin and housings.
Bought these and a few other bits and pieces...
did this..
Than this...
On to this...
then this...
Posted: Fri Sep 26, 2008 4:25 am
by (EST)MahviaDeTyrk
But I think - MQ rear diff centre go's into GQ front diff housing withouth mods
(if You are using GQ front ring and pinion)
Posted: Fri Sep 26, 2008 8:05 am
by WICKED
(EST)MahviaDeTyrk wrote:But I think - MQ rear diff centre go's into GQ front diff housing withouth mods
(if You are using GQ front ring and pinion)
I think you'll find that do to that the C/W&P needs to be redrill to a different bolt pattern!
Posted: Fri Sep 26, 2008 1:45 pm
by nastytroll
WICKED wrote:(EST)MahviaDeTyrk wrote:But I think - MQ rear diff centre go's into GQ front diff housing withouth mods
(if You are using GQ front ring and pinion)
I think you'll find that do to that the C/W&P needs to be redrill to a different bolt pattern!
kingy had a thead on the mq/mk lsd into gq front. I fitted a v6 terrano lsd into a gq centre (third member) for a mate.