Page 1 of 1
gu diff
Posted: Mon Sep 29, 2008 5:12 pm
by tailpipes
just want to know whats involed in trasfering gu front diff to gq chassis?, does every thing bolt straight in besides the draglink to streering box? will gu pitman arm bolt onto gq box? and i got gq center with a arb locker will it bolt into gu housing?
Posted: Mon Sep 29, 2008 6:58 pm
by Shorty88
yeah m8 all bolts up pritty shaw u have to use the gu steer box not just the pitman arm. n with ur centre u will have to remove the thrust block between the spider gears otherwise the axels wont fit. have fun
Posted: Mon Sep 29, 2008 7:49 pm
by nastytroll
depends how old the airlocker is, it may not have a thrust block.
Posted: Mon Sep 29, 2008 9:22 pm
by michael a
I had to cut axels down as very old airlocker thrust block not removable.
I cut about 5mm off the end of both axles it worked a treat.
Posted: Tue Sep 30, 2008 4:01 pm
by tailpipes
what about tail sharft and brakelines do they all hook up ?
Posted: Tue Sep 30, 2008 6:10 pm
by broken80
front shaft and brakelines are straight boltup.
Posted: Tue Sep 30, 2008 7:21 pm
by tailpipes
cheers 4 that broken80 got seriours front end problems