Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo Kit GU 4.8 (Where to buy)

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Turbo Kit GU 4.8 (Where to buy)

Post by madrolla68 »

Looking at turboing a 4.8 GU, anybody got any ideas on where to get stuff from ,anybody know somebody thats done it????

Any help would be great

MAtt
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

There are manifolds available out of Dubai, I don't know about a whole kit though. Personally I'd just make it and I'd be going for aftermarket management, larger injectors, intercooler, fuel pump. They are a very efficient engine and large power increases are easily acheived. You might want to consider pistons and rods if going for larger power increases.

Cheers

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

AXT in melbourne makes them in kit form, sells them mostly to UAE customers, call Andrew see what suits.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

NutterGQ wrote:AXT in melbourne makes them in kit form, sells them mostly to UAE customers, call Andrew see what suits.
That kit is it for the 4.8 or 4.5
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

he does both, but 4.5's have been known to bend rods at 15psi (which on one of them is actually a bit or power anyway) and break autos pretty easy once they reach 165rwkw (3rd gear usually).


4.8's are quite good all round and respond well to boost.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests