Outer Limits 4x4 Board

an 85 drover has a 1.3 from the factory in a narrow track body will the transfer be a 1.3 the same as a later wide track one just stuffed into a nt and is the flange bolt pattern the same as a wide track or is the bolt pattern like a narrow track 1.0 case to match the nt diffs

No there is a NT transfer, same as the WT though handbrake on the rear like the 1.0lt's, looks the same as the 1.0lt with the switch but doesn't have the good gearing.

Flanges are different to the 1.0 and the WT. Confused yet.