Page 1 of 1
6" lift on gq. Changes needed?
Posted: Thu Oct 02, 2008 7:49 pm
by Bowie
I've got a set of 6" springs and drop boxes. So all i have to do is; trailing arms, panhard rods, shocks (of course), swap rear tailshaft backwards. Is that it? Anyone who's done this, any advice? Cheers
Posted: Thu Oct 02, 2008 7:56 pm
by Fmx_Aus
Brake lines too mate.
Posted: Thu Oct 02, 2008 8:33 pm
by nastytroll
notch front X member and posably the rear X member, depends on shock length.
Posted: Thu Oct 02, 2008 8:39 pm
by Bowie
That doesn't seem too bad. no dramas with tailshaft angles?
Posted: Thu Oct 02, 2008 9:14 pm
by Rampage
Bowie wrote:That doesn't seem too bad. no dramas with tailshaft angles?
angle shoudl be ok! mine was but soem people suffer small vibes! swap your rear tailsahft end for end around so the skinny end is at gearbox end as it will then clear rear brace!! and you will def need to notch front crossmember!
Posted: Thu Oct 02, 2008 9:29 pm
by bogged
Bowie wrote:That doesn't seem too bad. no dramas with tailshaft angles?
Shorty or LWB?
Posted: Fri Oct 03, 2008 7:05 am
by HeathGQ
through the 6 away and put 4 in. all u need.
othe rthan that, brakes lines as stated
Posted: Fri Oct 03, 2008 8:50 am
by bogged
HeathGQ wrote:through the 6 away and put 4 in. all u need.
x 2