Page 1 of 1
pajero grows up lol
Posted: Thu Oct 02, 2008 10:38 pm
by mad geordies
Posted: Fri Oct 03, 2008 5:27 am
by NJV6
Love it
It wasn't until after I had cut mine I realised I had cut it in the wrong place - your is how I should have done it, mine was along the line level with the top of the rear lights and too low.
Nice work!
Posted: Fri Oct 03, 2008 3:10 pm
by WACKO
wicked... i like it..
have you got any more pics of choping the c pillar to fit? just curious what cuts you made as the roof at the back is wider than the middle isnt it?
Sam.
Posted: Fri Oct 03, 2008 6:09 pm
by mad geordies
i mate its about inch and half wider so cut it in the middle at the top and fixed the sides then, welded them in so i had a gap at the top then plated it, will see if i have any piccys about
Posted: Tue Oct 07, 2008 11:46 am
by Mechz
Nice work. They are some insane beadlocked tyres.
Although I must say I don't really see the point in chopping it when you could just get a J-Top and weld it up.
Posted: Tue Oct 07, 2008 3:36 pm
by WACKO
Mechz wrote:Nice work. They are some insane beadlocked tyres.
Although I must say I don't really see the point in chopping it when you could just get a J-Top and weld it up.
not sure you can get jtops in the UK?
Sam
Posted: Tue Oct 07, 2008 6:16 pm
by mad geordies
yeah you can get j-tops here but if you look at the 1st piccy i bought it for 3grand. then changed it offroaded it then got board so rather than buy another j-top thought just make one, be the only one in the uk that i know of, so just a little diffrent, my roll over bars are thicker than a j-tops, so why spend more cash and buy another j-top that some one has already made into apick up when i can do it my way lol
it will be good when finished, 35x12.5x15 bfg tyres with 10"wide rims
Posted: Wed Oct 08, 2008 1:10 pm
by Mechz
mad geordies wrote:yeah you can get j-tops here but if you look at the 1st piccy i bought it for 3grand. then changed it offroaded it then got board so rather than buy another j-top thought just make one, be the only one in the uk that i know of, so just a little diffrent, my roll over bars are thicker than a j-tops, so why spend more cash and buy another j-top that some one has already made into apick up when i can do it my way lol
it will be good when finished, 35x12.5x15 bfg tyres with 10"wide rims
I can see why you modded what you already had done work on, just seems a pity to hack up such a clean shorty
Posted: Wed Oct 08, 2008 5:07 pm
by mad geordies
i know mate it had a full soft black leather trim aswell, never seen another in a shorty, was clean but its old now like so what the hell,
Posted: Fri Oct 10, 2008 6:00 am
by mad geordies
still working on it loads to do lol
