Page 1 of 1
80 series...remote entry?
Posted: Sat Oct 04, 2008 9:53 am
by seaeagle
i know it has cent/locking but did they come with a remote? 95mdle
my door barrle keeps jaming and it would work out cheaper to fit central loking than get a new lock, im sick of pulling the door apart...lol
Posted: Sat Oct 04, 2008 11:32 am
by phippsy
I've got a '98 40th anniversary model and it has no remote, just the key central locking. Been looking at an alarm with the central locking as part of it.
Posted: Sat Oct 04, 2008 11:34 am
by dow50r
Toyota optioned a security system with this model or it was srd on sahara. You can have installed an aftermarket one that will do thesame...even some imobilisers do central locking.
Andrew
Posted: Sat Oct 04, 2008 5:20 pm
by diby_2000
Toyota have a universal central locking kit that was used on a few models. it comes with wireing instructions for an 80. Its not the ultimate c/locking but it has a toyota badge on the remotes. about $100 from memory.
Posted: Sun Oct 05, 2008 6:31 am
by bj on roids
diby_2000 wrote:Toyota have a universal central locking kit that was used on a few models. it comes with wireing instructions for an 80. Its not the ultimate c/locking but it has a toyota badge on the remotes. about $100 from memory.
$100 from Toyota?
That sounds a bit far fetched, have you got a part number?
Posted: Mon Oct 06, 2008 11:23 am
by Toy80Diesel
Just get an alarm with the central locking control wires. Then you wire this up into the drivers side kick panel. There are two wires (one to open and one to close) which you connect to the alarm. It's basically wired up to the switch you have on the armrest of the drivers door to open and lock the car.
Posted: Mon Oct 06, 2008 7:16 pm
by Punchy
mongoose alarm, all fixed
Posted: Tue Oct 07, 2008 11:10 am
by croozaman
my 92 model 80 has a factory badged remote opener on it, gather it was factory fitted?
Posted: Fri Oct 10, 2008 4:10 pm
by tas80
Jaycar electronics sell what you require cat No. is LR8839, costs 59.95
Posted: Thu Oct 23, 2008 3:18 pm
by seaeagle
cool thanks for that, where can i get a wiring diagram for the door control unit?
Posted: Sat Oct 25, 2008 7:22 am
by bj on roids
diby_2000 wrote:Toyota have a universal central locking kit that was used on a few models. it comes with wireing instructions for an 80. Its not the ultimate c/locking but it has a toyota badge on the remotes. about $100 from memory.
Any word on this? I seriously want to buy one.
Posted: Sat Oct 25, 2008 3:22 pm
by seaeagle
hooked it up.....fark yer, should have done it ages ago.
Posted: Sat Oct 25, 2008 4:20 pm
by tas80
Makes life a hell of a lot easier!
Posted: Sat Oct 25, 2008 4:34 pm
by diby_2000
[quote="bj on roids"][quote="diby_2000"]Toyota have a universal central locking kit that was used on a few models. it comes with wireing instructions for an 80. Its not the ultimate c/locking but it has a toyota badge on the remotes. about $100 from memory.[/quote]
Any word on this? I seriously want to buy one.[/quote]
I cant find the book that came with it. I know i would have kept it as it has the wireing diagram and how to program new remotes.
I'll have a better look and let you know if i find it.
Posted: Sat Nov 01, 2008 1:05 pm
by diby_2000
Found the paperwork.
Remote control conversion kit
Toyota Part No. 08674 32002C
Posted: Mon Nov 03, 2008 12:24 pm
by Bluey
i put in a mongoose alarm, model 80 or something to that extent. worked brilliantly.
i have 2 ac delco batteries in the car, i had no end of problems with batteries going flat. even down below 7v for maybe a day or 2 not being driven. pulled the alarm out and more problems. stupid thing, i hate car alarms now, although i wouldn't mind a simple remote door lock again
Posted: Tue Nov 04, 2008 9:48 pm
by Patchymon
I just finished installing a Warlock remote central locking system i bought from JB Hifi
Very easy to install.. just connected it to two wires in the drivers door and then earth and 12v power.. very easy..
HOWEVER... my system has the ability to flash the lights when you lock/unlock.. as well as make the horn go..I dont know how to wire this up and the instructions that came with the system were very light on..
Does anyone have any ideas on how to do this please...
Patchy
Posted: Wed Nov 05, 2008 6:58 pm
by fester2au
Talking central locking in the 80 mine doesn't work properly. When you shut the drivers door you hear 2 clicks like the locking trys to lock but then unlocks again, however the buttons do not move. If you use the switch on the drivers armrest it seems to work but if you use the key in the door it does not work. I repalced the controller in the door as I had a spare but it didn't change anything. Is this just an adjustment issue on the drivers actuator. I had a quick look but it looks involved to get at so haven't ventured too far in there yet.
Posted: Fri Nov 07, 2008 7:03 pm
by Bluey
if you flick the switch on inside of ddor then all the doors lock. if you use key in drivers door or passenger door, i'm pretty sure it only locks those doors respective doors only. i may be wrong, had a few beers. hmmm, beer
Posted: Fri Nov 07, 2008 8:57 pm
by fester2au
That doesn't explain the double clicking and I noticed today that when I get in the car after opening the drivers door with the key that whn I close it and it does te double click thing it does sometimes unlock all doors.
As far as teh key only unlocking the drivers door then how can they call it central locking. I'm sure it should work as expected via the drivers door and key.
Posted: Fri Nov 07, 2008 9:21 pm
by Bluey
double clicking. umm, don't know. still central locking, its central locking from switch inside drivers door. can't honestly remember if it works from key on outside, been ages since i tried. pretty sure that key on outside passenger door won't lock/unlock all doors
Posted: Fri Nov 07, 2008 9:31 pm
by fester2au
Bluey wrote:double clicking. umm, don't know. still central locking, its central locking from switch inside drivers door. can't honestly remember if it works from key on outside, been ages since i tried. pretty sure that key on outside passenger door won't lock/unlock all doors
Most early cars did not function from passenger door but I'm sure it should function from drivers door via key.
Posted: Fri Nov 07, 2008 10:28 pm
by midi73
fester2au wrote:Talking central locking in the 80 mine doesn't work properly. When you shut the drivers door you hear 2 clicks like the locking trys to lock but then unlocks again, however the buttons do not move. If you use the switch on the drivers armrest it seems to work but if you use the key in the door it does not work. I repalced the controller in the door as I had a spare but it didn't change anything. Is this just an adjustment issue on the drivers actuator. I had a quick look but it looks involved to get at so haven't ventured too far in there yet.
Yes I had the same trouble when I hooked up the keyless entry in the 80. For those that have done it successfully what wires did you hook up to. I cannot get it to work properly, have had no end of trouble with it. Tried wiring in at the switch and also down at the control box. Would be great to be able to sort it out.
Posted: Fri Nov 07, 2008 10:30 pm
by midi73
Patchymon wrote:I just finished installing a Warlock remote central locking system i bought from JB Hifi
Very easy to install.. just connected it to two wires in the drivers door and then earth and 12v power.. very easy..
HOWEVER... my system has the ability to flash the lights when you lock/unlock.. as well as make the horn go..I dont know how to wire this up and the instructions that came with the system were very light on..
Does anyone have any ideas on how to do this please...
Patchy
Which two wires. are they extras or did you splice in? if you spliced, which ones? any advice would be great.
Cheers.
Posted: Mon Nov 10, 2008 6:15 pm
by midi73
can anyone help with this?
Posted: Mon Nov 10, 2008 8:29 pm
by Patchymon
Ok i connected the 2 wires from the system to the blue/black and blue/yellow wires.
Im pretty sure it didnt matter which way i wired it... but after playing with it for about a week i have worked out that for some reason the door lock button .. the one near the power window switch... no longer works.. i dont know why but it has no effect at all...
will have to look and play i think
still no idea with the lights though..
Patchy
Posted: Tue Nov 11, 2008 12:06 am
by midi73
Patchymon wrote:Ok i connected the 2 wires from the system to the blue/black and blue/yellow wires.
Im pretty sure it didnt matter which way i wired it... but after playing with it for about a week i have worked out that for some reason the door lock button .. the one near the power window switch... no longer works.. i dont know why but it has no effect at all...
will have to look and play i think
still no idea with the lights though..
Patchy
Yes that is the problem that I have. Also the key wont actuate the locks either.
Posted: Wed Nov 12, 2008 9:06 am
by bj on roids
diby_2000 wrote:Found the paperwork.
Remote control conversion kit
Toyota Part No. 08674 32002C
Thanks mate.
Appreciate this!
Posted: Wed Nov 12, 2008 4:02 pm
by phippsy
bj on roids wrote:diby_2000 wrote:Found the paperwork.
Remote control conversion kit
Toyota Part No. 08674 32002C
Thanks mate.
Appreciate this!
$180 RRP
$155 Trade
Prices from our local Toyota dealer.
Sorry, bought the last one he said was showing in stock in Brisbane...