Outer Limits 4x4 Board

Looking at running a 4terrain (4T1697N) clutch has any one had any issues with these

not at all bud. Got my 4.2 GU wagon done a few months ago. Very happy with it.

mates got one in his gq and its great, was going to put one in my gu but got the marks4x4 one insted.

Few people i know have them in there 4wds no problems at all

If you have any horse power under the bonnet forget them, for us new clutch , machined flywheel 37 tepadores , 330 RWHP and the clutch lasted a couple of drives till it was F**CKED.
We got Nicks performance clutch in brisbane to build us a clutch for approx 1K and it has held up to heaps of abuse with no signs of wear, also AVA race team robby marchall had a few differnt clutches including 4 terrain and the only one that has held up is Nicks performance clutch.
If you truck is standard or you dont drive it hard they will be okay but if you have engine mods and or race spend the extra money and get a custom clutch built.

SuperiorEngineering wrote:If you have any horse power under the bonnet forget them, for us new clutch , machined flywheel 37 tepadores , 330 RWHP and the clutch lasted a couple of drives till it was F**CKED.
We got Nicks performance clutch in brisbane to build us a clutch for approx 1K and it has held up to heaps of abuse with no signs of wear, also AVA race team robby marchall had a few differnt clutches including 4 terrain and the only one that has held up is Nicks performance clutch.
If you truck is standard or you dont drive it hard they will be okay but if you have engine mods and or race spend the extra money and get a custom clutch built.

Agree with this... mate of mine destroyed one in a 4.2 petrol, 4.6's, 35 simex in around 12 months; +/- 2. All the fingers on the pressure plate where fawked and the plate itself was pretty knacked, mind you he did gave it a pretty good work out... he is afraid of the skinny pedal!

If ya want a good clutch, ontrack has used chev clutches on nissans