Page 1 of 1
60's centre into 45 rear diff
Posted: Sun Oct 12, 2008 6:42 pm
by Matt_88
had some carnage on friday night and smashed my rear diff.. am getting a rear 60 series diff and i am just wanting to make sure that it will fit..
i have 4.11's in the front should they be the same?? what ratio's do 60 series run??
should it bolt straight in with same flanges for tailshaft??
cheers
matt
Posted: Sun Oct 12, 2008 7:15 pm
by AZZA'S HJ47
it will fit i think that they cam with 4.11 in the 60's though
Posted: Sun Oct 12, 2008 7:44 pm
by Dyna Beast
Flanges are the same too.
Posted: Sun Oct 12, 2008 8:33 pm
by jessie928
will bolt straight in,.
Jes
flange
Posted: Tue Oct 14, 2008 7:24 pm
by Wozza244
Just a personal experience, i bought a 45 series diff centre for my 60 and the flanges were different and what a prick of a job undoing the pinion nut!
Posted: Tue Oct 14, 2008 7:43 pm
by pcman
if its from a 1980+ fj45 its the same as a 60 if its earlier you will need to change the pinion or driveshaft flange
Posted: Tue Oct 14, 2008 8:52 pm
by bj on roids
Its the same axles and bolt pattern.
May need a tailshaft, but thats dependant on the year.
You can get an adapter, and you cant get flanges that are circular and have both bolt patterns drilled onto them.
Or swap the flange, do it up FT though.... don't want that chit comin off.