Page 1 of 1
WHO CAN SPRING OVER?
Posted: Mon Oct 13, 2008 6:24 pm
by AUSDOG
G'DAY, GOTA BJ42 AND WANT IT SPRUNG OVER ON 60S DIFFS. GOT THE DIFFS AND THE POWER STEER BITS LAST WEEK. WAS PLANING ON TAKING IT ALL TO OVERKILL WHEN I'M READY AND GETTING THEM TO DO IT.SPOKE TO SAM OVER THERE HE'S A PRETTY HELPFUL BLOKE. JUST WANTING TO KNOW OF ANY OTHER JOINTS OR PEOPLE THAT CAN DO A TOP JOB IN SYDNEY(THE SHIRE) AREA? ALSO ANY TIPS,PARTS OR ADVICE ON INCREASING THE WHEEL BASE AND GETING IT FLEXING AS MUCH AS POSSIBLE. ITS GUNA BE MY DAILY AND PROB GUNA RUN 36 TO 37INCH RUBBER. LETTUCE KNOW WHAT YA THINK. CHEERS FOR ANY RESPONCE.
Posted: Tue Oct 14, 2008 3:14 pm
by HANCOCK
Do a shackle reversal at the same time. Get heaps better ride and flex. I would consider a hydro assist setup too. Well worth it I think. just my 2 cents. That's what I did to my FJ73 works really well.
Posted: Tue Oct 14, 2008 7:42 pm
by AUSDOG
CHEERS MATE. SHACKLE REVERSAL IS ON THE LIST FOR SURE. ANY OTHER ADVICE IS MUCH APPECIATED. PROB GUNA HAVE A GO AT SPINGING OVER MYSELF, WITH THE HELP OF COUPLE MATES. HOW HARD CAN IT BE?!!
Posted: Tue Oct 14, 2008 8:57 pm
by pinkfloyddsotm
check out ZOLTAN's spring over on his 75,alotta awesome work done, getting shackle angles right etc.
Posted: Wed Oct 15, 2008 11:31 am
by taps
pinkfloyddsotm wrote:check out ZOLTAN's spring over on his 75,alotta awesome work done, getting shackle angles right etc.
And castor !!!!!!!!!!!
Posted: Thu Oct 16, 2008 4:01 pm
by AUSDOG
THANX FOR ALL THE TIPS. LETTUCE KNOW IF ANY THING ELSE COMES TO MIND ITS MUCH APPRECIATED. CHEERS FOR THE PMS PEOPLE SENT ME TOO, SOME INTERESTING ADVICE...
Posted: Sat Oct 18, 2008 10:04 am
by Harrow
LUKEYS 4X4 CUSTOMS!!!!
BEST OF THE BEST
GIVE HIM A CALL
www.lukeys4x4.com
Posted: Mon Oct 20, 2008 3:53 pm
by AUSDOG
spoke to luke at lukeys 4x4 couple of weeks ago. hes a champ and was pretty helpful. have you had work done by luke?
spring over
Posted: Mon Oct 20, 2008 4:19 pm
by zookboy
you want quality stick to overkill mate cant go wrong always works!
rate sam 150% he know whats hes talking about.
Re: spring over
Posted: Mon Oct 20, 2008 4:34 pm
by WICKED
zookboy wrote:you want quality stick to overkill mate cant go wrong always works!
rate sam 150% he know whats hes talking about.
Quoted!
Re: spring over
Posted: Wed Oct 29, 2008 3:03 pm
by DIRTY ROCK STAR
WICKED wrote:zookboy wrote:you want quality stick to overkill mate cant go wrong always works!
rate sam 150% he know whats hes talking about.
Quoted!
double quoted.
all i would say is this is a very rare opinion....
although hes a very good talker. not so good on the finishing or quality though. just judging by recent build threads, people taking their car elsewhere or people going to tufftruck and it breaking after 2 mins after being built there.