Outer Limits 4x4 Board

guys, just attempted to fab up a rear light mount, without much luck.
I used a piece of stainless angle,
bolted it to rear door right next to spare wheel carrier.
2 things,
1. it rubs against spare wheel
2. it shakes like no tomorrow.
Therefore, can anyone show me some pics of theirs, as i would appreciate not waisting anymore stainless.
Cheers

i made mine to sit behind the spare wheel just bolts on to the wheal
Carrier, very solid and iv wired it up on a 3way switch so it comes on in
revers or i can tern it on any time i want, its on an expendable pole so
can be adjusted in hight as well.









cheers Scott.

Here's mine. It only works in reverse

i drilled a hole in the rear bumper and just bolted it straight to that but with this if u go through water make sure u seal it properly

here's my light stand, took about 15 mins to make up and it seems to do the job with 2 twin beam hella's. Also below mine is my mates stand which he made up.