Page 1 of 1
OTHER THAN SNAKE RACING....
Posted: Thu Oct 16, 2008 8:56 pm
by AUSDOG
Snake have kits for spring over conversion and x ova steering etc...What are your thoughts on their products? Does any one else make these sort of 'kits'. cheers
Edit longlux
Shouting fixed
Posted: Thu Oct 16, 2008 9:15 pm
by MissDrew
Posted: Thu Oct 16, 2008 9:31 pm
by lump_a_charcoal
Or try lowrange in the US, oh and STOP SHOUTING!
Posted: Thu Oct 16, 2008 9:54 pm
by just cruizin'
Have you tried Superior Engineering?
Posted: Fri Oct 17, 2008 3:25 pm
by AUSDOG
CHEERS FOR THE INFO BOYS. AND I CANT STOP SHOUTING, I'VE GOT A.D.H.D AND TURRETS.. SH!T! FU*K! C$NT....SORRY
Posted: Fri Oct 17, 2008 4:18 pm
by lump_a_charcoal
Is that like Tourette's?
Having Turrets could be painful!
Posted: Fri Oct 17, 2008 7:49 pm
by AUSDOG
TELL ME ABOUT IT IT HURTS LIKE HELL, THATS WHY I'M ALWAYS YELLN SWEARN. Cookie SPELL EITHER. MUST BE LISDEXIC TOO..
Posted: Fri Oct 17, 2008 7:52 pm
by -Scott-
AUSDOG wrote:TELL ME ABOUT IT IT HURTS LIKE HELL, THATS WHY I'M ALWAYS YELLN SWEARN. . SPELL EITHER. MUST BE LISDEXIC TOO..
Dyslexics Untie!
Posted: Sat Oct 18, 2008 9:35 am
by RUFF
AUSDOG wrote:TELL ME ABOUT IT IT HURTS LIKE HELL, THATS WHY I'M ALWAYS YELLN SWEARN. . SPELL EITHER. MUST BE LISDEXIC TOO..
If you want any more help here your going to need to find the caps lock key.
Posted: Sat Oct 18, 2008 12:27 pm
by AUSDOG
No worries.
Posted: Sat Oct 18, 2008 3:16 pm
by RUFF
Thankyou. Now what sort of vehicle are you wanting to do these mods on?
Posted: Sat Oct 18, 2008 3:48 pm
by taps
Posted: Sun Oct 19, 2008 9:04 am
by AUSDOG
cheers Ruff. its a bj42 td. gota set of 60s diffs and power steering bits that i'm collecting. after as much flex as possible keeping it pretty low to ground. maybe running 36 inch rubber. guna get someone to do the steering and diff set up. maybe madfabs, lukeys4x4... not sure yet. i've spent hours reading through posts and the bibles on outers trying to broardn my knowlage as much as possible before i start. its my first propper build and i'm not expecting to get it wright the first time but thats all fun aye! i appeciate all the feed back and pms i'm getting in response. thanx again.
Posted: Sun Oct 19, 2008 12:03 pm
by Tojo
go to the members section and read shorty_forty's and twisty's build up threads.
http://www.outerlimits4x4.com/ftopic20060.php
http://www.outerlimits4x4.com/ftopic92609.php
they will help you understand how to get a lot of flex from a 40 series. If you want to keep it low do not go SPOA (there is no need). Both of these vehicles use very basic mods to get additional flex (longer springs). Neither of these have hi steer or 60 series diffs. You will have to search a bit harder for info on fitting the 60 series diffs (i can't remember what threads it is in). The width of the 60 series diffs means that the spring perch or spring mounts will need minor modifications. Good luck with the project.
Posted: Sun Oct 19, 2008 5:26 pm
by AUSDOG
thanx heaps for the links tojo. i'll sit down and have a good read as soon as... already got the diffs and i'm set on a spring over, need enough room to fit decent rubber. i'll try post up some pics of truck as it progresses. pretty new to using this site, where bouts would i post em? thanx again!
Posted: Sun Oct 19, 2008 7:42 pm
by WICKED
AUSDOG wrote:... and i'm set on a spring over, need enough room to fit decent rubber. !
I had 37'' Boggers on fully flipped rims on a SPUA 40 shorty
