Page 1 of 1
Toy diff swap
Posted: Sun Oct 19, 2008 3:35 pm
by SoldierBoy1
I am doing a toy diff swap I'm my Ser 1 disco, 80 Ser Elocker in the front and Hilux in the back.
Question , i have a 2 pinion open 4.1 center, and a 4 pinion lsd 4.556 rear.
can i make one out two, IE 4.1 gears in the 4.556 center.
Any help would be great.
Bruce
Posted: Sun Oct 19, 2008 5:16 pm
by SoldierBoy1
Sorry i an also the specs for the holes in the housing if someone has them
Bruce
Posted: Sun Oct 19, 2008 6:19 pm
by cloughy
I believe there is no reason you can't use the 4 pinion LSD centre with the 4.1 crown wheel, but can't be sure the crown wheel flange is in the same situ, a quick measurement will confirm it
Posted: Sun Oct 19, 2008 8:38 pm
by lokka
Yep should be a straight swap as long as bothe carriers and hemis are tha same all should bolt up
Posted: Mon Oct 20, 2008 5:22 pm
by SoldierBoy1
thanks for that ill give it a go.
no one has anything in the way of a template for the holes?
Bruce
Posted: Mon Oct 20, 2008 6:37 pm
by Micka
SoldierBoy1 wrote:thanks for that ill give it a go.
no one has anything in the way of a template for the holes?
Bruce
Try using a gasket.
Posted: Mon Oct 20, 2008 7:45 pm
by cloughy
SoldierBoy1 wrote:thanks for that ill give it a go.
no one has anything in the way of a template for the holes?
Bruce
HSV rangie is the man
Posted: Tue Oct 21, 2008 7:23 am
by HSV Rangie
yep.
made by jacmac.
sits in my office for anyone who wants to use. (Dandenong)
only cost is freight.
Michael.
0397065988
0413566492
Posted: Tue Oct 21, 2008 4:48 pm
by SoldierBoy1
Thanks, ill take you up on the offer when the time is right.
No guesswork then.
Bruce