Page 1 of 1
HZJ105 CD player ???
Posted: Tue Oct 21, 2008 4:08 pm
by balzackracing
Got some questions in regards to what people have done about fitting a single din cd player into a HZJ105R crusier. I have bought a new Kenwood cd player and removed the orignal double din tape player only to find that the stero face leaves about 10mm gap either side. Not only that but when I went to fit my GME TX3200 UHF and din face underneath the cd player I found the height is to bloody short and can't fit it either.
Any one got any pics of what they have done?
Posted: Tue Oct 21, 2008 4:09 pm
by balzackracing
Forgot to mention its a 2004 model
Posted: Wed Oct 22, 2008 9:39 am
by 98lux
I put the CD player on the bottom and the TX 3200 on top of the CD player. Mine was only a single din from factory and the was a cover plastic plate on top of the OME tape deck.
With the plastic cover there was a raised bit in the center, i just cut that out and the TX3200 fitted perfect. BUT i do still have a 10mm gap around the CD player that i will infill with some black perspex.
Posted: Wed Oct 22, 2008 6:16 pm
by Sixty
My 06 HZJ105 had the oversized double DIN stereo also. I fitted a plastic coin/junk tray under mine which came with extra's to fill in the sides.
Avail from Strathfield Car mob approx $30
Posted: Wed Oct 22, 2008 7:34 pm
by balzackracing
Sixty wrote:My 06 HZJ105 had the oversized double DIN stereo also. I fitted a plastic coin/junk tray under mine which came with extra's to fill in the sides.
Avail from Strathfield Car mob approx $30
Cheers, I will look into the kit. Might have to mount the uhf some where else.