Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo size
Moderators: toaddog, Elmo, DUDELUX
Turbo size
I 'm putting together a turbo kit for my 1hz and need to know size of turbo? would a Garrett m24 AR 60 t3 be suitable ?.I want the power low to 3000 rpm as I'm towing .I will be fitting glycol to air intercooler and 3" exhaust with all the guages .Any help would be great
that turbo has a pritty small compressor housing (.60) and is more designed for a smaller diesel like the 3b, 13b or even 12ht
But if you have it i would be inclined to use it as it will give great low down spool, it will give boost up and above 3500rpm also.
If your doing alot of highway driving and towing i would do the IC and 3" zorst first up to get that heat out, and no more than 12psi.
Good luck
But if you have it i would be inclined to use it as it will give great low down spool, it will give boost up and above 3500rpm also.
If your doing alot of highway driving and towing i would do the IC and 3" zorst first up to get that heat out, and no more than 12psi.
Good luck
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Who is online
Users browsing this forum: No registered users and 0 guests