Page 1 of 1
MQ gearbox seals, where to source?
Posted: Sat Oct 25, 2008 8:11 am
by pongo
i was told that i have to go genuine by CBC but was hoping some one knows a different story
i need a full set for a 5speed box and tranfer as well as the PTO if possible
anyone got any ideas?
Posted: Sat Oct 25, 2008 12:23 pm
by Chook350
cbc were able to get seals for my 4speed a couple of years ago, but frm memory i had to get sum from nissan, best way is to take ur id od n depth measurements and take that to cbc n they should be able to source for ya, hope that helps
Posted: Sat Oct 25, 2008 4:42 pm
by Patroler
from memory the front one is a standard size - the thickness may vary a mm or two but id and od are std, i think the rear had to come from nissan.
Posted: Sun Oct 26, 2008 6:55 am
by V8Patrol
Get some gasket paper and cut em yourself ! ( cheapest option )
everything else from Nissan or a reputable ( large business) bearing supplier.
Kingy
Posted: Sun Oct 26, 2008 5:20 pm
by Patroler
V8Patrol wrote:Get some gasket paper and cut em yourself ! ( cheapest option )
Hold on are you talking shaft seals or yea, as kingy mentioned gaskets, i assumed the input and output shaft seals...
Posted: Mon Oct 27, 2008 5:48 am
by V8Patrol
You need bot Gaskets & Seals when rebuilding an MQ/MK box
Gaskets = cut em
Seals from Nissan or major brearing supplier.
( take the old seals with you when ordering em....
)
Kingy