Page 1 of 1
link for mods in darwin
Posted: Mon Oct 27, 2008 4:46 pm
by kond
AS stated just after a link for modifactions allowed in Darwin NT ie suspension lift how high tyre size is an x-link ok . Any help would be graet
Cheers
Posted: Mon Oct 27, 2008 4:53 pm
by grimbo
Posted: Mon Oct 27, 2008 5:34 pm
by Skegbudley
They seem to be following NCOP already so its 50mm for 4WD tyres. That explains why there are so many lucky b*stards driving around up there on 35' rubber.
http://www.infrastructure.gov.au/roads/ ... _ncop.aspx
Posted: Mon Oct 27, 2008 5:52 pm
by simkell
it 4 inch combined lift, so 2 inch lift 35's are ok but if you have say 2 inch sus, 2 body and 35, then no not legal up. however you do not need an engineer for basic modifications, just TAC approval.