Outer Limits 4x4 Board

Hi, i couldnt see anything by searching for what wanted so i thought id just ask, i have an 80 series landcruiser that im going to be putting the front locker in so i want to o the cv's while im at it. ive heard that ntn's and longfields are the go but i dont know who to contact about getting a decient set. can anyone hlep me with a compay and what brand and a guide to price?

thanks

For ntn contact C.V.1 04103 46341, for longs check some of the yota builds. Maybe lockedup4x4 (sp?) they have a truggy build in members section.

If your gunna drive it hard definately go with longfeild super axles or similar, ntn are good cv's but are a genuine part not a hardcore component. Look into hubgears also, yotas break standard hubs like no tomorro also.

drive line services have stores on the north & south side

make it easy!

http://www.locktup4x4.com.au/

From my experiances the 80 series NTN CVs are only available ex Toyota. I know this as i used to purchase 100+ Hilux and Patrol NTN CVs at a time and still could not get a supply on the 80 series ones.

Save your money and time buy the Longfields.

Ebay - cheapies (do not forget the postage)
Driveline Services - often match or close to Ebay price + trasnport
Locked Up 4x4, Longfields, just purchsed a set, great service, pricy over std CVs but will probably pay for themselves with in one to two blown cvs (plus seals, bearings, F/W hubs when they blow)