The rear shackle on one side of my HJ47 troopy springs keeps inverting up against the chassis. It's very annoying!!
On both sides at the rear the shackle angle seems wrong, about right angles to the chassis rail. I beleive they are original springs that have been bent upwards to get more lift out of them, they do however (when not inverted) give me a good enough ride (for a 40 troopy). They appear more circular than parabolic and have a smaller curve radius than they should and pull the shackles in at the wrong angle...you get me?
I can't really afford to get new springs, can anyone think of any remedies that will stop my shackle from inverting all the time?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
shackles keep inverting
Moderators: toaddog, TWISTY, V8Patrol, Moderators
shackles keep inverting
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
How about a set of anti inversion shackles.
http://www.superiorengineering.com.au/s ... =2a&page=4
http://www.superiorengineering.com.au/s ... =2a&page=4
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Who is online
Users browsing this forum: No registered users and 2 guests